A modern, local-first CAD editor for the browser — fully compatible with OpenSCAD.

Write parametric models in the OpenSCAD language, see them render instantly, and export to STL, 3MF, OFF, AMF, SVG or DXF. Everything runs on your machine. There is no server, no account, and nothing is uploaded.

→ Try it in your browser

No install, no sign-up. It loads a starter model you can edit straight away.

Quick start · Reference · What's new in the language · CLI · Contributing

---

What it is

A CAD editor for the browser that speaks OpenSCAD. Open an existing .scad file and it renders unmodified — the whole language is there, not a subset.

It also adds a few things OpenSCAD doesn't have, under one rule: every addition has a defined way back to plain .scad, so nothing you write here can strand you.

Features

Runs on your machine	No server, no account. Your models never leave the browser.
A tour on first visit	Ten slides of pictures showing what the app and the language additions can do, skippable at any step and shown once; Take the tour in the command palette brings it back.
Full OpenSCAD language	Existing .scad files open and render unchanged.
Real files	Opens and saves straight to disk, with a download/upload fallback on Firefox and Safari.
Live customizer	Sliders and dropdowns generated from your // parameter comments.
Modern editor	Syntax highlighting, autocomplete with every call form, suggested values for arguments that take a fixed set, the signature kept on screen while you fill a call in, tabs, inline errors.
Type in inches	5in becomes 127 as you type. The file stays in millimetres — see below.
Built-in reference	Every element of the language explained plainly, with a rendered example of each. F1, or the Help button.
Preview and render	F5 previews, F6 renders what Export writes. Auto-render keeps up as you type.
Exports	STL, 3MF, OFF, AMF for 3D; SVG and DXF for 2D; plain .scad; and PNG pictures — the current view or any named view at up to 4K, or a sheet of front, right, top and isometric views at one scale, on a transparent, white or themed background.
Imports	STL, OBJ, OFF, DXF, SVG, and heightmaps via surface().
Draw it	A drawing board for outlines: lines, pen curves, boxes and circles, with measurements you type into. Trace over a picture scaled to a known distance, or let the picture trace itself. The drawing lands in the project as an SVG that import() extrudes.
Project files	Add images, drawings, meshes, fonts and libraries once; every tab reaches them by name, as though they sat in the same folder.
Fonts for text()	Name a font and it loads itself — ~50 Google Fonts, the ones installed on your machine, or a file of your own. Every one previewed in its own typeface.
CAD navigation	Turntable orbit with a corner view cube — click a face to snap to it, or drag it to orbit.
Orthographic view	One click flattens the view: no perspective, parallel edges stay parallel and sizes read true at any depth — what front and top views are for. Remembered across reloads.
Arrange the panels	Drag any panel — code, viewport, console, Customizer, Files — to either column, resize them, hide the code, or maximize one panel to fill the window. The Settings menu's Layout section has presets (model focus, code focus, tune parameters, mirrored) and a reset to default. Remembered across reloads.
Measurement	Click points in the viewport for coordinates and distances.
Vary colours	One click paints every item its own colour, so touching parts are easy to tell apart. Everything in one union() stays one colour; colours set with color() are kept.
Animation	$t playback in the app, frame export from the CLI.
Works offline	Installable, and fully functional with no network.
Headless CLI	bscad model.scad -o model.stl, for batch jobs and CI.

Reference

Every element of the language — the whole of OpenSCAD, plus everything BetterSCAD adds — written for someone who has never used CAD, with a rendered example of each. Read it here, or press F1 in the app.

The document and the app's Help view are generated from one catalogue, along with every screenshot in them, so they cannot disagree with each other or with the engine.

Quick start

Nothing to install — open it in your browser. First run offers a sample model, a blank file, or a file from your disk.

To run it locally:

git clone https://github.com/theanam/betterScad.git
cd betterScad
npm install
npm run dev          # http://localhost:5174
npm run build        # static site in packages/app/dist — serve it anywhere

Language extensions

Everything OpenSCAD has, plus the following. Save as OpenSCAD .scad and these are rewritten automatically. The console's Info tab lists what a file uses and the lines it appears on, and previews the .scad it will become.

negative() — turn anything into negative space

Wrap a shape in negative() and it stops being material and starts being a hole. It gets carved out of everything else in the same scope, so holes can sit next to the thing they go through instead of being hoisted into a difference() at the top of the file.

union() {
  plate();
  boss();

  negative() {              // carved out of BOTH plate() and boss()
    translatez(-1) cylinder(h = 20, r = 5);
    for (i = [0:4]) rotatez(i * 72) translate(18, 0, -1) cylinder(h = 20, r = 2.5);
  }
}

"The same scope" means the enclosing { … }, module body, or top level — a negative never reaches further than the braces it was written in. That limits what it cuts, not what names it sees: a bare { … } still lets its variables out, exactly as in OpenSCAD.

Everything else

Syntax	What it does	Becomes, in plain .scad
negative() { … }	Turns anything inside it into negative space	difference() around the scope
cube(size, center, r) square(size, center, r)	The same box and rectangle, with a radius on the edges. r = 0 is the stock shape	A hull of corner spheres or circles
cube(size, center, r, centerxy, chamfer) square(size, center, r, chamfer)	chamfer cuts every edge flat at 45° instead of rounding it — the same word as on cylinder(). chamfer = 0 is the stock shape	A hull of three boxes or two rectangles
cube(…, centerxy = true)	Centres a box on X and Y but keeps it standing on Z = 0, instead of half below the grid as center = true does	The box moved by half its width and depth
cylinder(…, chamfer) chamfer1, chamfer2, edge_style	Takes the rim off either end — cut flat by default, or edge_style = "round". 1 is the bottom and 2 the top, as with r1/r2	A revolve of the same profile
linear_extrude(…, scale, ease)	Curves a tapered extrusion into its ends instead of running dead straight. ease = 0 is the stock shape; [bottom, top] eases each end on its own	A generated module stacking the same short extrusions
text(…, radius) start, facing	Runs the writing around a circle instead of a straight line, spaced by real letter widths	Per-glyph text() calls, with the widths measured into the file
regular_polygon(sides, length)	An equilateral polygon — say the side length, not the radius	circle() at the matching radius, with $fn = sides
thread(d, pitch, h)	A screw thread. Add internal = true for the hole the same bolt screws into; profile = "trapezoid" or "square" and crest = "round" change the tooth	A generated module sweeping the profile up a twisted extrusion
gear(m, teeth, h)	An involute gear. Any two sharing a module mesh. Add internal = true for a ring gear, helix for a helical one	A generated module building the same involute profile
translate(x, y, z) rotate(x, y, z) mirror(x, y, z)	Loose numbers, for when the brackets are just noise	translate([x, y, z]), and so on
translatex(d) translatey(d) translatez(d)	Move along one axis	translate([d, 0, 0]), and so on
rotatex(a) rotatey(a) rotatez(a)	Turn about one axis	rotate([a, 0, 0]), and so on
mirrorx() mirrory() mirrorz()	Flip across one plane	mirror([1, 0, 0]), and so on
get_size(object) get_position(object)	How big a part is, and where its lowest corner is, as [x, y, z] — get_size(base()).z to stack on it	⚠️ The value it measured, fixed at the parameters the file was saved with
for (i = 0; i < n; i = i + 1)	A C-style loop as a statement	A range for with the condition as a guard
is_range(x)	Tests for a range, like the other is_* functions	⚠️ Nothing — it becomes undef in stock OpenSCAD

Stock syntax is untouched: rotate(a, v) is still the axis rotation it always was. The shapes get a generated module in the exported file — defined once and called, so the export reads like what you wrote.

Every one of these, and every element of OpenSCAD itself, is written up with a rendered example in docs/reference.md — the same content the app shows under Help (F1). The implementation details are in docs/language.md.

Draw an outline and extrude it

Not every shape starts as code. Draw in the Files panel (or New drawing… in the command palette) opens a drawing board: lines, a pen for curves, boxes and circles, on a millimetre grid. Every segment carries its length, every box its width, height and corner radius, every circle its diameter — click a number and type a new one. An outline inside another is a hole; overlapping outlines merge. Points snap to the grid and to the corners, centres and edges of what is already drawn, with a guide line showing what they lined up with; hold Alt to draw free.

Select several outlines (Shift+click, or drag a box around them) and group them: a group moves and deletes as one, and inside-means-hole is judged within it. The eraser takes a region out: click where two grouped circles overlap and that lens is gone from the extrusion, while both circles stay circles you can still move and resize. Click an erased region to put it back.

Done writes the drawing into the project as an ordinary SVG and puts linear_extrude(5) import("drawing.svg"); at the cursor. The file is plain SVG in millimetres — OpenSCAD reads it just the same — and it also carries the editable drawing, so Edit drawing in the Files panel brings back the boxes and curves, not the points they became.

Trace a picture. Load a photo or a scan behind the board and fade it. To set its size, pick two points in it and type how far apart they really are. Then draw over it, or have it traced for you: Trace dark lines outlines the marks on a scan or a logo, and Trace the subject finds the main object in a photograph — a small on-device model (U²-Net, Apache-2.0, 2.4 MB, downloaded once on first use), with nothing sent anywhere. Invert traces the other side: light marks on a dark ground, or the stencil around the subject. Either way the result is lines and pen curves with the same anchors and handles a pen drawing has — drag a handle to reshape a curve, Alt to break a smooth point into a corner — not a cloud of points.

Key	Does
V L P R C E	Pick, Lines, Pen, Box, Circle, Eraser
Shift+click · drag on empty board	Add to the selection · select what the box encloses
⌘G ⌘⇧G ⌘A	Group, ungroup, select all
Enter	Finish the line run or close the pen path
Escape	Drop the shape in progress, then the tool, then the selection
Alt (held)	Draw off the grid
Grid button	Snap to the grid, snap to other outlines, and the grid step from 0.1 to 10 mm; remembered
Delete	Remove the selected outline
Wheel · right-drag	Zoom · pan

Type in inches, keep a millimetre file

OpenSCAD has no units. Every number is a millimetre by convention, and the whole ecosystem — printers, slicers, hardware tables — agrees. That leaves anyone working from an imperial drawing doing arithmetic in their head, or scattering * 25.4 through the file, which is a thing to get wrong once and then never notice again.

So the editor does the arithmetic. Type a measurement with a unit on it and it converts the moment you finish the number:

plate = 6in;          ->  plate = 152.4;
bore  = 0.25inch;     ->  bore  = 6.35;
rod   = 1.5 inches;   ->  rod   = 38.1;

in, inch and inches all work, with or without a space. Nothing converts until the measurement is finished — 5in is also the first three characters of 5inch — so it waits for whatever you type next to end it: a comma, a bracket, a semicolon, a newline.

What lands in the file is a plain number. This is an editor convenience and nothing more: no unit is stored, nothing in the saved model depends on it, and a file written this way opens in OpenSCAD with no idea it was ever typed in inches. The converted number flashes briefly so you can see it happen, and a single undo puts your 5in back if you wanted the letters.

Off by default for nobody — it is on, and there is a switch in Settings if you would rather it were not.

Settings

The gear in the toolbar holds the handful of things the app asks rather than assumes. None of them changes what a saved file means.

Theme	Light or dark.
Round dimensions	Whether autocomplete offers cylinder(h, d) or cylinder(h, r) first. Both are right; people are firmly one or the other.
Inch entry	The conversion above.
Tab completion	Tab takes the open suggestion. With none open it indents, as it always did.
Auto-render	Re-render as you type, or only on F5.
Indent	Two spaces or four.

Project files

A model that says import("bracket.stl") needs a folder to find it in, and a browser has none. The Files panel is that folder: add a file once and every open tab can name it, exactly as it would on disk.

Drop files anywhere in the window, or use Add files. What goes in there:

	Used by
.png .jpg .dat	surface("terrain.png")
.svg .dxf .stl .obj .off .3mf	import("logo.svg")
.scad .bscad	use <MCAD/gears.scad>, include <…>
.ttf .otf .ttc	text("Hi", font = "Orbitron")

Folders work, and so does a bare name: use <MCAD/gears.scad> finds a file you added as gears.scad. A library can be opened in a tab to edit — the tab is then what your model renders against, and Save puts it back.

The files are kept in your browser, so they are still there after a reload. Nothing is uploaded, here as everywhere else.

Save as .zip

Once a model uses a project file, the Save menu offers Save as .zip: the model plus every file it actually used, laid out so the paths in the script resolve as they stand. Unzip it and it opens in OpenSCAD.

What goes in is what the render resolved, not what the text mentions — a library three levels down an include chain is in, an import inside an if that never ran is not.

Opening a .zip does the reverse: models at the top level become tabs and everything else joins the Files panel.

Fonts are the one thing a zip cannot fully deliver. text(font = "Orbitron") names a family, and OpenSCAD looks for families in its own font path rather than beside the file. The font travels in fonts/ with a note saying so.

File formats

.bscad is the native format, and it is a .scad file — the extras (panel layout, customizer presets, camera) live in a leading comment, so OpenSCAD opens it unchanged.

Saving follows the extension: a .bscad keeps its extras, a .scad is saved as plain source. Save ▸ Save as OpenSCAD .scad is the guaranteed-portable version; it tells you what it will change, and a file that needs no changes is saved byte for byte.

Opening a .scad that uses the extensions above warns you, naming the lines.

Command line

bscad model.scad -o model.stl               # render to STL
bscad model.scad -D size=30 -D label='"v2"' # override parameters
bscad *.scad -f 3mf -o build/               # batch render
bscad anim.scad --frames 60 -o frames/      # animation frames
bscad model.bscad --legacy-scad -o out.scad # convert to plain OpenSCAD
bscad model.scad --strict                   # treat warnings as errors, for CI

Browser support

	Rendering	Direct file save	System fonts
Chrome / Edge	✅	✅	✅
Firefox	✅	Download / upload	Load font files
Safari	✅	Download / upload	Load font files

Needs WebAssembly and WebGL2 — anything from roughly 2021 onwards.

Status

Early but real: the language is complete, the app is usable, and the engine is covered by tests. Not there yet:

• Third-party libraries (BOSL2, MCAD) are untested and unsupported.
• Desktop builds are scaffolded but not yet built — see docs/desktop.md.
• A persistent library of your own parts and snippets. Multi-file tabs and include/use across them already work.
• surface() with image heightmaps works in the browser but not in the CLI.

Analytics

betterscad.org counts page views with Google Analytics. Nothing about your models is sent — no source, no geometry, no file names. Builds you make yourself carry no analytics at all; the tag is added only by the deploy workflow.

Deploying

The site is fully static: npm run build, then serve packages/app/dist anywhere. For GitHub Pages, .github/workflows/deploy.yml publishes on every push to main with no repo settings to change.

The build has no fixed base URL — one dist/ works from a domain root, from a Pages project path and from file:// in the desktop shell. The few tags that must be absolute (<link rel="canonical">, the Open Graph image, the sitemap) are therefore generated from packages/app/public/CNAME, which is the address the site is actually served under. Point that file at your own domain and they follow it; delete it and they are simply omitted, rather than pointing search engines at ours and declaring your deployment a duplicate. BETTERSCAD_SITE_URL overrides it if you serve from a path rather than a domain root.

Contributing

Issues and pull requests welcome. Four non-negotiable rules:

1. Any new language syntax ships with its plain-.scad downgrade, implemented in transpile.ts and covered by a test proving the rewrite is equivalent.

2. The export has to read like the file that produced it. A one-liner is rewritten in place; anything bigger becomes a generated module, defined once and called wherever the shape was used. Generated code is code someone will open.

3. Any new element is documented before it ships. Add it to the catalogue in packages/app/src/reference/ with a worked example, then run npm run reference. That renders its screenshot and regenerates docs/reference.md, and the app's Help view picks it up from the same file. An element that is not in the reference is not finished, and CI fails if the reference is out of date.

4. Every change moves the version, by semver:

   • minor — anything a user can see in the editor, the language, or an extension: a new element, a new panel, a changed behaviour.
   • patch — a release that adds no capability: fixes, docs, chores.
   • major — a break in the language or in the file format, once there is a 1.0 to break from. Below 1.0 semver puts those in minor, and so does this project: cube(r) replacing rounded_cube() is a 0.2 → 0.3.

   Run npm run bump -- minor (or patch, major). The number lives in eleven places — five manifests, a literal in the engine's API, and the lock file — so it is never edited by hand, and npm run version:check fails CI when any of them drifts.

npm run typecheck
npm test
npm run build
npm run reference          # after adding or changing any element
npm run bump -- minor      # or patch; never edit a version by hand
npm run screenshot         # retakes the README's app screenshots, needs `npm run dev`

How it all fits together: docs/architecture.md.

Licence

MIT.

The engine is written from scratch; no code is derived from the OpenSCAD project. That is what makes the MIT licence possible — the CSG kernel is Manifold (Apache-2.0) rather than CGAL. Also uses Three.js, CodeMirror and opentype.js (all MIT); bundled fonts are OFL-1.1.

Brand assets and tokens live in brand/.