A mutating Euclidean drum machine for the Music Thing Workshop Computer, with sample playback, CV control and clocking.
Beta firmware, updated 17 November 2026. Please report issues through the project page.
Choose the firmware for your card:
- 16 MB, CV clock enabled: Download UF2
- 16 MB, CV clock disabled: Download UF2
- 2 MB, untested: Download UF2
Connect the card to your computer and open the Compulidian web manager in a Web MIDI-capable browser such as Chrome. Use it to choose or edit sample banks and change settings.
- Generates around 16 independent Euclidean drum patterns, with phrase changes and a variation fill on the last bar of each four-bar phrase.
- Plays the built-in 808 kit or user sample banks through Audio Out 1. Audio Out 2 outputs a 16th-note clock gate; four pulse/CV outputs provide drum gates.
- Main and X control the density of two track groups, with CV1 and CV2 modulation. Audio In 1 controls shuffle; Audio In 2 controls sample pitch.
- Syncs to its internal tempo, USB MIDI clock, or CV clock on firmware that supports CV clock input.
| Control | Action |
|---|---|
| Main + CV1 | First group of drum patterns: density |
| X + CV2 | Second group of drum patterns: density |
| Y | Internal tempo, 30-180 BPM |
| Switch UP (hold) | Locks the pattern seed; fills and density changes continue |
| Switch DOWN | Mutes new notes; can be configured for sample-bank selection |
| Audio In 1 / 2 | Shuffle / sample pitch |
| Pulse In 1 / 2 | CV clock reset / clock, when supported by the firmware |
Connect over USB, open the web manager, and choose a Playing bank to change the sound. Use Edit bank to edit one of the user banks. Settings apply live; use Save settings to keep them after reboot. Bank edits and sample tags have their own save actions.
On 16 MB firmware, you can also hold Switch DOWN while powering on to choose a bank and set the switch role without the web manager. Playback continues during setup.
You can connect via serial (e.g. using Putty or Arduino Serial Monitor) to send commands and receive feedback from the Compulidian:-
Available commands:
Parameter debug commands:
I - stream parameter input info to console
d i <index> - toggle debug on a parameter input
Sample player commands:
s - toggle sample interpolation on/off
c - toggle calculate mode between main loop and audio worker
v - toggle volume on/off
Seqlib commands:
f - toggle fills on/off
state - dump controls, clock, pattern and held-note state
clock-state - dump BPM, pulse/reset counts, queue losses and strict clock state
Kit bank commands:
b - print bank detection status
B <slot> - switch to bank slot <slot>
l - list track patterns and assigned voice samples
lx - list track patterns and assigned voice samples (extended)
p <pattern> - trigger named pattern
X - send sysex config to host
y - dump saveloadlib settings tree
Y - dump sample store status
Clock commands:
play - start the clock
stop - stop the clock
clock-internal - set clock mode to internal
clock-external-cv - set clock mode to external CV
clock-external-cv-ppqn <1|2|4|8|12|16|24> - set live CV PPQN (currently 1)
transitions - (debug) show pulse input transitions
clock-external-usb - set clock mode to external USB host
V - dump version/build information
help - show this help message
See README-MORE.md for detailed bank setup, clock and RESET options, web-manager workflows, diagnostics, serial commands, and build instructions. Hardware and driver notes are in ComputerCard-notes.md.
Known issue: ADC readings can fluctuate, most noticeably as sample-pitch variation. Feedback and collaboration are welcome.