Skip to content
ContinuumRoboticsLabPublic

About

CRAFT: A 3D-printed Modular Design Library for Task-specific Continuum Robots

Resources

Stars

6 stars

Watchers

0 watching

Forks

Repository files navigation

CRAFT: CAD Library for Modular Continuum Robots

Paper • Assembly Video

This repository contains the CAD models accompanying our paper:

Puspita Triana Dewi, Chloe Pogue, Chengnan Shentu, Andrea Gotelli, Jessica Burgner-Kahrs: CRAFT: a 3D-printed modular design library for task-specific continuum robots npj Robotics, 2026.

Quick Start

🎥 Assembly video

Watch how a CRAFT module is assembled:

Module Assembly


Repository Structure

.
├── LowStiffnessModule/
│   ├── *.step
│   └── *.stl
├── MediumStiffnessModule/
│   ├── *.step
│   └── *.stl
├── HighStiffnessModule/
│   ├── *.step
│   └── *.stl
├── DirectionalStiffnessModule/
│   ├── *.step
│   └── *.stl
├── UniDirectionalStiffnessModule/
│   ├── *.step
│   └── *.stl
├── ExtensibleModule/
│   ├── *.step
│   └── *.stl
├── Rivet/
│   ├── Rivet.step
│   └── Rivet.stl
└── README.md

Each module folder contains:

  • STEP (.step) files for editing and integration into CAD software.
  • STL (.stl) files for direct 3D printing.

Included modules

The repository contains CAD models for the six CRAFT modules:

  • Low Stiffness
  • Medium Stiffness
  • High Stiffness
  • Directional Stiffness
  • Uni-Directional Stiffness
  • Extensible

These modules can be combined in arbitrary order to construct multi-segment tendon-driven continuum robots with application-specific stiffness distributions and morphologies. The Rivet folder contains the connector used to mechanically join adjacent modules.


Fabrication

The CAD files are intended for additive manufacturing.

The accompanying publication describes:

  • recommended printing methods (FDM and SLA)
  • materials
  • assembly procedure
  • geometric scaling
  • tendon routing
  • mechanical characterization

Please refer to the Methods section of the paper for fabrication details.


Module Assembly

Each module consists of:

  • Disks
  • Rings
  • Compliant elements (Octo-Flex, leaf spring, reinforcement filler, or parallel spring depending on the module)
  • Rivets for connecting adjacent modules

A full-resolution assembly video is available here.


Citation

If you use these designs in your research, please cite:

@article{Dewi2026CRAFT,
  author  = {Dewi, Puspita Triana and Pogue, Chloe and Shentu, Chengnan and Gotelli, Andrea and Burgner-Kahrs, Jessica},
  title   = {CRAFT: a 3D-printed modular design library for task-specific continuum robots},
  journal = {npj Robotics},
  year    = {2026},
  doi     = {10.1038/s44182-026-00107-x}
}

License

The CAD files in this repository are released under the MIT License.

The accompanying publication is available under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


Contact

Continuum Robotics Laboratory
University of Toronto

For questions or suggestions, please open a GitHub issue.

About

CRAFT: A 3D-printed Modular Design Library for Task-specific Continuum Robots

Resources

Stars

6 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors